VOLVO
OBC-P0D5800 - Proximity Detection Circuit Low. General Failure Information. No sub type information
System
On-board Charger (OBC)
Volvo models this fault code applies to
Applies to the following models:
1 modelV60 (2011–)
Show models by year and engine (2)
What does this fault code mean?
The control module OBC has registered that the signal in the charging circuit is too low. The fault can appear when the charging cable is connected or when the control module is active. A charging cable that does not suit the car, or a damaged charging cable, can cause the fault. Charging is not possible while the fault remains.
Possible causes
- An incompatible charging cable is used
- The charging cable is damaged
What you can do
- 1Read out and erase the fault code, charge again and see whether it comes back
- 2Check that the charging cable is not damaged, for example chafing, kinks or burnt connectors
- 3Check that the correct type of charging cable is used for the car, since a cable that does not suit can cause the fault
- 4Have a workshop check that the charging socket in the car is not damaged and that the cable is fully seated in it
- 5The high voltage system may only be handled by authorised personnel. Do not work on it yourself; have a workshop check the charging if the fault remains
Symptoms you may notice3
- A text message and a warning symbol are shown in the display
- Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
- The LED on the charging cable or the charging socket shows a fault
What the fault can affect1
- Charging the high voltage battery is not possible
General guidance for car owners. Diagnosis on the car can point to a different cause.