VOLVO
OBC-P164287 - CAN Link Circuit. Bus Signal / Message Failures. Missing message
System
On-board Charger (OBC)
Volvo models this fault code applies to
Applies to the following models:
1 modelV60 (2011–)
Show models by year and engine (2)
What does this fault code mean?
The battery charger control module (OBC) monitors the communication on the car's CAN network with the other control modules. A charging control message must arrive within a set time, and if it does not, charging is cancelled. The fault is set when the message is missing while the cable is plugged in and its switch is turned on.
Possible causes
- Faulty communication between the battery charger control module (OBC) and gateway OBC
- Gateway OBC is damaged
What you can do
- 1Read out and erase the fault code, then charge again with the charging cable connected and its switch on, and see whether it comes back
- 2Have a workshop check gateway OBC and its cables. Do not work on the high voltage system yourself
Symptoms you may notice2
- Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
- The LED on the charging cable or the charging socket shows a fault and charging is reduced
What the fault can affect1
- Charging the high voltage battery is not possible
General guidance for car owners. Diagnosis on the car can point to a different cause.