VOLVO
OBC-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
On-board Charger (OBC)
Volvo models this fault code applies to
Applies to the following models:
1 modelV60 (2011–)
Show models by year and engine (2)
What does this fault code mean?
The battery charger control module (OBC) normally receives information from the engine control module (ECM) over the CAN network, and compares the vehicle configuration with the one from the central electronic module (CEM). The fault is set when the vehicle configuration from CEM is missing. The code can appear with a software update, and then it does not need to be fixed. Charging the high voltage battery is not possible while the fault remains.
Possible causes
- The fault code can be stored during a software update
- No vehicle configuration arrives from the central electronic module (CEM)
What you can do
- 1Has the car recently had a software update? If so, the fault code should be erased without further troubleshooting
- 2Read out and erase the fault code, then drive and see whether it comes back
- 3If the fault code comes back, have a workshop check the vehicle configuration and the central electronic module (CEM). The high voltage system may only be handled by authorised personnel
Symptoms you may notice3
- Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
- The LED on the charging cable or the charging socket shows a fault and charging is reduced
- A text message and a warning symbol are shown in the display
What the fault can affect1
- Charging the high voltage battery is not possible
General guidance for car owners. Diagnosis on the car can point to a different cause.