VOLVO
PBM-U200264 - Switch. Algorithm Based Failures. Signal plausibility failure
System
Powertrain (Engine & Gearbox)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The parking brake control module (PBM) checks the signal from the parking brake switch. The fault code is stored when the signal from the switch is incorrect or unreasonable for a longer time. The cause is that the switch has become stuck in the activated position.
Possible causes
- The parking brake switch has become stuck in the activated position
What you can do
- 1Press the parking brake switch and check that it returns when you release it
- 2Look at the switch for dirt or damage that could make it stick
- 3Read the fault code, clear it and test drive the car to see whether it returns
- 4If the switch has stuck, have a workshop replace it
- 5The parking brake is a safety function: have a workshop check it if it does not work as it should
Symptoms you may notice4
- The parking brake warning lamp lights up or behaves abnormally
- Yellow warning symbol and text message in the display
- Electric parking brake does not work
- Electric parking brake works with reduced function
General guidance for car owners. Diagnosis on the car can point to a different cause.