VOLVO
PDM-B10EE02 - Rear door passenger side double locking motor. General Failure Information. General signal failure
System
Passenger Door Module (PDM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
What does this fault code mean?
The control module in the rear door on the passenger side supplies the lock motor for the deadlock position via a relay. The passenger door module receives information about the status of the relay from the rear door control module. The fault code is set if the voltage is too low or too high, or if the relay has jammed.
Possible causes
- Short-circuit to ground
- Short-circuit to supply voltage
- The relay has jammed
What you can do
- 1Check that the cable harness is not short-circuited to ground or supply voltage, for example by measuring with a multimeter
- 2Check that the physical lock in the door can be locked and unlocked easily
- 3Test the central locking and see whether the fault code returns
- 4The fault code indicates a damaged component in the control module in the rear door. Have a workshop replace it
- 5After the replacement, check that the fault is remedied by locking and unlocking the car again
Symptoms you may notice2
- Locking, unlocking and central locking do not work
- Child lock on the doors does not work
What the fault can affect1
- Other outputs that supply the lock motors are activated
General guidance for car owners. Diagnosis on the car can point to a different cause.