VOLVO
PDM-B10EE11 - Rear door passenger side double locking motor. General Electrical Failures. Circuit short to ground
System
Passenger Door Module (PDM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (4)
What does this fault code mean?
The control module in the rear door on the passenger side supplies the lock motor for the deadlock position. The signal from the output is too low when the deadlock position is activated, and the fault can then show as the lock not going into the deadlock position. The cause is a short to ground in the power supply cable.
Possible causes
- Power supply cable short-circuited to ground
What you can do
- 1Check that the relevant fuses are intact
- 2Test the door lock and the central locking with the buttons and controls to see which functions are affected
- 3Use a multimeter to check that the supply wire to the lock motor is not short-circuited to ground (the body)
- 4Look for damage, chafing and moisture in the wiring to the rear door and check the connectors for oxidation
- 5Remedy as needed, then check that the deadlock position works
Symptoms you may notice1
- Does not go into the deadlock position
General guidance for car owners. Diagnosis on the car can point to a different cause.