VOLVO
PDM-B118F00 - Right front window. General Failure Information. No sub type information
System
Passenger Door Module (PDM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (4)
What does this fault code mean?
The right front window has lost its position information, so the automatic window operation stops for that window. The cause may be that initialization was never done, that the setting was lost after a voltage drop while the window lift was in use, or that the control module's power supply was cut.
Possible causes
- Initialization was not carried out
- The position setting was lost after a voltage drop when the window lift was activated
- Power to the control module was interrupted
What you can do
- 1Check that the control module gets power: the fuses should be intact and the battery connections secure
- 2Try the automatic window operation from the switch by pressing two steps up
- 3Move the window manually to its upper turning position
- 4Have a workshop initialize the window position
- 5Afterwards, check that the automatic operation works and that the fault code does not return
Symptoms you may notice1
- Automatic window operation is not working
General guidance for car owners. Diagnosis on the car can point to a different cause.