VOLVO
PDM-B12DF01 - Front Window Local Down Switch. General Failure Information. General electrical failure
System
Passenger Door Module (PDM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
What does this fault code mean?
The driver and passenger door modules (DDM/PDM) continuously check the signal from the switch that operates the electric window. If the switch for lowering the front window has been held in for a long time, or if the signal cable is shorted to ground, the code is set. The module then ignores the signal until a switch that is not pressed is detected.
Possible causes
- The button has jammed in the pressed-in position
- The signal cable is shorted to ground
- Damaged local control for operating the window lift
What you can do
- 1Read the code, clear it and check that the switch returns when released and does not stick
- 2Check the fuses for the window lifts in the fuse box and make sure they are intact
- 3Check that the switch for the front window is secure in the door panel and that the connectors behind it are free from moisture and oxidation
- 4Use a multimeter to check that the wire to the switch has no contact with ground (the body)
- 5If you have diagnostic equipment, read the switch signal in live data and check that it returns to the not-pressed state when the switch is released
- 6If the fault remains: have a workshop check the switch and the door module
Symptoms you may notice1
- The electric window does not work, works with reduced function or works incorrectly
What the fault can affect1
- The control module ignores the signal from the switch until a switch that is not pressed is detected
General guidance for car owners. Diagnosis on the car can point to a different cause.