VOLVO
PDM-DD30 - Communication with camera module Internal Fault
System
Passenger Door Module (PDM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
What does this fault code mean?
The passenger door module (PDM) tries to communicate with the camera on the passenger side over LIN. If contact with the camera in the passenger door cannot be made, the code is set.
Possible causes
- A fault inside the camera in the passenger door
What you can do
- 1Activate the blind spot system and check that the LEDs flash three times; then start the engine and check that the LED works
- 2Read the code, clear it and run a test drive. If the code does not come back, no further action is needed, as the fault may have been temporary
- 3Check that the connectors at the camera and the door module are secure and free from moisture and oxidation
- 4Check that the wire between the door module and the camera is intact and free from visible damage
- 5If the fault remains: have a workshop check the camera on the passenger side and replace it if needed
Symptoms you may notice2
- The LED does not light
- A message is shown in the information display
General guidance for car owners. Diagnosis on the car can point to a different cause.