VOLVO
PDM-U042200 - Invalid Data Received From Body Control Module. General Failure Information. No sub type information
System
Passenger Door Module (PDM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
What does this fault code mean?
The driver and passenger door modules (DDM/PDM) continuously receive information about the current power supply state from the central electronic module (CEM). If the quality of that signal is lower than the module can accept, the code is set.
Possible causes
- The fault lies in the central electronic module (CEM)
What you can do
- 1If you have diagnostic equipment, read the codes in the central electronic module (CEM) first, as the fault is located there
- 2Clear the code only after the fault in the central electronic module has been put right, then check whether it comes back
- 3Have a workshop trace the fault in the central electronic module, as the source of the fault is there
Symptoms you may notice2
- Electric adjustment of the mirrors does not work
- The electric window does not work, works with reduced function or works incorrectly
General guidance for car owners. Diagnosis on the car can point to a different cause.