VOLVO
PSCM-U045A68 - Invalid data received from Parking Assist Control Module "A". Algorithm Based Failures. Event information
System
Power Steering Control Module (PSCM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–)
What does this fault code mean?
The control module receives information from the parking assist control module (PAM) that it judges to be incorrect, and the fault is stored when this lasts for a longer period. It is an information code that should not be repaired and does not indicate a fault in the module where it is stored.
Possible causes
- Fault in the parking assist control module (PAM), which sends incorrect information
What you can do
- 1Read and note the fault code; it normally does not need repair unless it returns
- 2Check that the connectors to the parking assist control module (PAM) are secure and clean
- 3If the fault returns, have a workshop read the parking assist control module and check the wiring between it and the steering control module
- 4Steering is a safety system: have a workshop check the car if the steering feels abnormal
Symptoms you may notice2
- Front or rear parking assist does not work
- Front monitoring, active safety or parking camera functions do not work as they should
What the fault can affect1
- The control module uses a predefined value instead of the information from parking assist
General guidance for car owners. Diagnosis on the car can point to a different cause.