VOLVO
PSCM-U210000 - Control Module Not Configured. General Failure Information. No sub type information
System
Power Steering Control Module (PSCM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (11)
- Volvo S60 (2011–)2011–2013
- Volvo S60 (2011–)2014–2015All engines except: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2010Engine D4164T only
- Volvo S80 (2007–)2011–2015
- Volvo V60 (2011–)2011–2013
- Volvo V60 (2011–)2014–2015All engines except: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Engine D4164T only
- Volvo V70 (2008–)2011–2015
- Volvo XC60 (2009–)2011–2015
- Volvo XC70 (2008–)2011–2015
What does this fault code mean?
The control module has not received the vehicle configuration from the central electronic module (CEM), and the fault is stored when it is missing. Until the configuration arrives, the control module is not configured for the car.
Possible causes
- Fault in the central electronic module (CEM), which sends the vehicle configuration
What you can do
- 1Read the fault code, note it and clear it
- 2Check that the fuses are intact
- 3Road test the car and note whether the power steering behaves abnormally
- 4If the fault comes back, have a workshop read the central electronic module (CEM), since the configuration is sent from there
- 5Steering is a safety system: have a workshop check the car if the steering feels abnormal
Symptoms you may notice2
- Yellow warning symbol and message in the display
- Power steering assistance control does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.