VOLVO
PSL-0048 - Hall sensor signal backrest. Short to supply
System
Powertrain (Engine & Gearbox)
Volvo models this fault code applies to
Applies to the following models:
3 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013)
Show models by year and engine (3)
What does this fault code mean?
The left front seat module (PSL) registers too high a reading from the Hall sensor in the backrest, and the fault code is set then. The wire from the Hall sensor is shorted to supply voltage.
Possible causes
- The wire from the backrest Hall sensor is shorted to supply voltage
What you can do
- 1Read and note the fault code, clear it and run the backrest to see whether it returns
- 2Use a multimeter to check that the wire from the backrest Hall sensor has no contact with supply voltage
- 3Check the connector at the backrest for loose fit, oxidation and poor contact
- 4If a short is found, repair or replace the wire, or have a workshop do it
- 5After the repair, check that the seat can move the same distance forwards whether the backrest is folded down or upright
Symptoms you may notice1
- Seat functions work worse than normal
General guidance for car owners. Diagnosis on the car can point to a different cause.