VOLVO
PSL-E010 - Power supply. Signal too low
System
Powertrain (Engine & Gearbox)
Volvo models this fault code applies to
Applies to the following models:
3 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013)
Show models by year and engine (3)
What does this fault code mean?
The voltage supply to the left front seat module (PSL) is too low, and the fault code is set then. The electrically adjusted memory seat then does not work at all.
Possible causes
- The supply voltage to the control module is too low
What you can do
- 1Measure the battery voltage with a multimeter and check that the battery is in good condition
- 2Check that the fuses for the seat are intact
- 3Check that the connectors in the supply to the control module are secure and free from corrosion
- 4Clear the fault code and test the seat electrically to see whether the code comes back
- 5If the code returns, have a workshop check the voltage supply and the control module
Symptoms you may notice1
- Electrically adjusted memory seat does not work at all
General guidance for car owners. Diagnosis on the car can point to a different cause.