VOLVO
PSM-0002 - Hall sensor 2. Faulty signal. Intermittent fault
System
Power Seat Module (PSM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
What does this fault code mean?
The driver's seat module (PSM) receives no Hall sensor pulse from motor 2, which adjusts the backrest tilt, while the motor is activated. The fault is intermittent, meaning it has occurred at an earlier time but may not be present right now.
Possible causes
- Defective Hall sensor in motor 2
- Signal wire shorted to ground or supply voltage
- Open circuit in the signal wire to the Hall sensor
What you can do
- 1Read and note the fault code and clear it
- 2Because the fault is intermittent: run the backrest and check whether the fault code returns
- 3Check the connectors to the driver's seat module and to the backrest motor for oxidation and contact resistance
- 4Look for chafing or pinching damage on the wires to the backrest motor, especially where they can move
- 5Wiggle and flex the harness while measuring with a multimeter, to see whether the open circuit or short comes and goes
- 6If the fault returns, have a workshop check the backrest motor, since the Hall sensor is built into it
Symptoms you may notice1
- Automatic operation of the seat does not work, while the other motors work as normal
General guidance for car owners. Diagnosis on the car can point to a different cause.