VOLVO
PSM-B1B8924 - Seat Slide Motor Hall Sensor. General Signal Failures. Signal stuck high
System
Power Seat Module (PSM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The fault code means no Hall pulses are registered from motor 1, which controls the front-rear adjustment of the seat, even though the motor is activated. Automatic operation of the seat and the outer mirrors then does not work, and neither does the automatic front seat memory adjustment.
Possible causes
- Damaged Hall sensor in motor 1
- Signal cable short-circuited to supply voltage
What you can do
- 1Check that the seat fuses are intact.
- 2Check that the connectors to motor 1 are firmly seated and not corroded.
- 3Use a multimeter to check that the signal wire from the Hall sensor has no contact with supply voltage.
- 4If you have a diagnostic tool: run motor 1 and check that the Hall sensor value changes.
- 5If the fault remains, have a workshop check the motor with its Hall sensor and the control module.
Symptoms you may notice2
- Automatic operation of the seat and outer mirrors does not work
- The automatic memory adjustment of the front seat is not working
General guidance for car owners. Diagnosis on the car can point to a different cause.