VOLVO
PSR-0029 - Operating button, memory 2. Activated too long
System
Powertrain (Engine & Gearbox)
Volvo models this fault code applies to
Applies to the following models:
3 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013)
Show models by year and engine (3)
What does this fault code mean?
The right power seat control module (PSR) has registered that the operating button for memory 2 has been activated for longer than allowed, which sets the code. The button may have jammed in the pressed position, or the control panel may be damaged. Memory position 2 then does not work.
Possible causes
- The button for memory 2 has stuck in the pressed position
- Damaged control panel
What you can do
- 1Check that the seat fuses are intact; their locations are in the owner's manual or on the fuse chart
- 2Press memory button 2 in and release it. It should spring back freely; if it sticks or stays down, the control panel is the fault
- 3Check that the control panel is firmly fitted and not damaged, wet or dirty around the buttons
- 4Clear the code after the checks and road test the car. If it returns and the button still sticks, replace the control panel
Symptoms you may notice1
- The memory button does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.