VOLVO
RSE-B12F888 - Video Input "G". Bus Signal / Message Failures. Bus off
System
Unknown System / Manufacturer Specific
Volvo models this fault code applies to
Applies to the following models:
4 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (4)
What does this fault code mean?
The RSE checks the video signal running between itself and the right screen. The code is set when the signal is missing or wrong.
Possible causes
- No signal between the RSE and the right screen
What you can do
- 1Check that the fuses for the rear seat entertainment are intact
- 2With the ignition off, check that the connectors to the right screen and to the RSE are fully seated and free from oxidation
- 3With a multimeter, check that the wire from the RSE to the right screen has no open circuit and no contact with ground or voltage
- 4With diagnostic equipment and the engine running, read the RSE parameters and see whether the signal from the right screen is listed
- 5If the fault remains, have a workshop with diagnostic equipment check the RSE and the screen
Symptoms you may notice1
- Rear seat entertainment does not work, has reduced function or works incorrectly
General guidance for car owners. Diagnosis on the car can point to a different cause.