VOLVO
SAS-0005 - Steering wheel angle signal B. Signal too high. Intermittent fault
System
Steering Angle Sensor (SAS)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
What does this fault code mean?
The steering wheel angle sensor signal B, one of several signals from the code disc, is too high, and the code is set then. The fault is intermittent.
Possible causes
- Poor contact or oxidation at the connections and connector blocks
- Short-circuit to supply voltage
- Open circuit
- Defective control unit
What you can do
- 1With the ignition off, check that the connectors at the angle sensor and the steering wheel module are fully seated and free from oxidation
- 2With the ignition off, use a multimeter to check that the cables have no open circuit and no contact with voltage (plus)
- 3Safety: anti-spin and stability are switched off while the fault is present, so have a workshop remedy it; do not work on the steering system yourself
Symptoms you may notice3
- The anti-spin warning lamp is on
- The stability function is absent
- Anti-spin does not work
What the fault can affect2
- The stability function is disconnected
- The anti-spin function is blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.