VOLVO
SAS-0017 - Control module. Faulty signal
System
Steering Angle Sensor (SAS)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (11)
- Volvo S60 (2001–2009)2005–2009
- Volvo S80 (1999–2006)2005–2006
- Volvo V70 (2000–2008)2005–2008
- Volvo V70 XC / XC70 (2001–2007)2005–2007
- Volvo XC90 (2003–)2005–2006All engines except: B8444S
- Volvo XC90 (2003–)2007Engine B5254T2, D5244T4 only
- Volvo XC90 (2003–)2008–2010All engines except: B6324S, B8444S
- Volvo XC90 (2003–)2011All engines except: B6324S5, B8444S
- Volvo XC90 (2003–)2012All engines except: B6324S5
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The steering wheel angle sensor control module has found that global values received from the central electronic module (CEM) are wrong. The incorrect CEM data is the cause, and the stability function is blocked while the fault is present.
Possible causes
- Incorrect data from the central electronic module (CEM)
What you can do
- 1Read and note the code, clear it and road test to see whether it returns
- 2With diagnostic equipment, check whether the CEM module has its own fault codes, since this fault concerns data from it
- 3Have a workshop fault-trace the central electronic module (CEM) system, since the data problem starts there
- 4The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Symptoms you may notice3
- Anti-spin warning lamp comes on
- General warning lamp comes on
- Stability control not working
What the fault can affect1
- Stability function blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.