VOLVO
SAS-0041 - Steering wheel angle sensor. Internal fault
System
Steering Angle Sensor (SAS)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
What does this fault code mean?
Although the code is named internal fault, it applies when the angle from the sensor exceeds a set value in either direction. The cause is that the sensor is misadjusted.
Possible causes
- Steering wheel angle sensor is misadjusted
What you can do
- 1Read and note the code, clear it and road test to see whether it returns
- 2With diagnostic equipment, turn the wheel between its end stops and check that the angle in live data updates smoothly
- 3Check that the connectors at the sensor and the steering wheel module are firmly seated and free from oxide
- 4Check that the steering wheel module and the sensor are correctly fitted, since the code can point to incorrect installation
- 5Stability control is off while the fault is present, so have a workshop correct the adjustment promptly
Symptoms you may notice3
- Anti-spin warning lamp on
- Stability control not working
- Anti-spin not working
What the fault can affect2
- Stability function disconnected
- Anti-spin function blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.