VOLVO
SAS-B124C29 - Turn Indicator Stalk Switch Pack. General Signal Failures. Signal signal invalid
System
Steering Angle Sensor (SAS)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (8)
- Volvo C30 (2007–2013)2011Engine D4162T, D4164T, D5204T, D5204T5 only
- Volvo C30 (2007–2013)2012–2013Engine D4162T, D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011Engine D4162T, D4164T, D5204T, D5204T5 only
- Volvo S40 (2004–2013)2012Engine D4162T, D5204T, D5204T5 only
- Volvo V50 (2004–2013)2011Engine D4162T, D4164T, D5204T, D5204T5 only
- Volvo V50 (2004–2013)2012Engine D4162T, D5204T, D5204T5 only
What does this fault code mean?
The left and right turn signal switches on the stalk have been activated at the same time, which sets the code and stops the turn signal switch working.
Possible causes
- Left and right turn signal switches on the stalk are active at the same time
What you can do
- 1Check that the fuses are intact
- 2Check that the turn signal stalk does not activate both sides at once
- 3Read and note the code, clear it and road test to see whether it returns
- 4With diagnostic equipment, read the status of the turn signal switches in live data while moving the stalk each way
- 5If the fault remains, have a workshop check the turn signal stalk; the steering wheel angle sensor is part of the safety systems, so act promptly
Symptoms you may notice1
- Turn signal switch does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.