VOLVO
SAS-B124F71 - Steering Wheel Navigation Switch Pack. Mechanical Failures. Actuator stuck
System
Steering Angle Sensor (SAS)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (8)
- Volvo C30 (2007–2013)2011Engine D4162T, D4164T, D5204T, D5204T5 only
- Volvo C30 (2007–2013)2012–2013Engine D4162T, D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011Engine D4162T, D4164T, D5204T, D5204T5 only
- Volvo S40 (2004–2013)2012Engine D4162T, D5204T, D5204T5 only
- Volvo V50 (2004–2013)2011Engine D4162T, D4164T, D5204T, D5204T5 only
- Volvo V50 (2004–2013)2012Engine D4162T, D5204T, D5204T5 only
What does this fault code mean?
One or more buttons on the RTI keypad have been activated for too long, and the code is set. The steering wheel navigation controls do not work because a button has stuck.
Possible causes
- A button on the RTI keypad has stuck in the activated position
What you can do
- 1Check that the fuses are intact
- 2Press the RTI keypad buttons one at a time and check whether any stays pressed
- 3Read and note the code, clear it and road test to see whether it returns
- 4With diagnostic equipment, follow the button status in live data and see whether any button remains in the activated state
- 5The steering wheel angle sensor is part of the car's safety systems, so have a workshop repair the fault if it remains
Symptoms you may notice1
- Steering wheel navigation controls do not work
General guidance for car owners. Diagnosis on the car can point to a different cause.