Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    SAS-E010
    VOLVO

    SAS-E010 - Control module. Voltage too low

    System

    Steering Angle Sensor (SAS)

    Volvo models this fault code applies to

    Applies to the following models:

    5 models

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Show models by year and engine (11)
    • Volvo S60 (2001–2009)2005–2009
    • Volvo S80 (1999–2006)2005–2006
    • Volvo V70 (2000–2008)2005–2008
    • Volvo V70 XC / XC70 (2001–2007)2005–2007
    • Volvo XC90 (2003–)2005–2006All engines except: B8444S
    • Volvo XC90 (2003–)2007Engine B5254T2, D5244T4 only
    • Volvo XC90 (2003–)2008–2010All engines except: B6324S, B8444S
    • Volvo XC90 (2003–)2011All engines except: B6324S5, B8444S
    • Volvo XC90 (2003–)2012All engines except: B6324S5
    • Volvo XC90 (2003–)2013–2014Engine B5254T9 only
    • Volvo XC90 (2003–)2015

    What does this fault code mean?

    The steering angle sensor (SAS) sits inside the steering wheel module (SWM) and takes its power from it. The code means the voltage is too low. The sensor checks its voltage against that of the central electronic module (CEM), and the cause can be poor contact or oxidised connectors in the steering wheel module, or an internal fault in the sensor.

    Possible causes

    • Poor contact or oxidised connectors in the steering wheel module (SWM).
    • Internal fault in the steering angle sensor (SAS).

    What you can do

    1. 1Check that the fuses for the steering wheel module are intact in the car's fuse box.
    2. 2Clear the code and test drive the car to see whether it returns.
    3. 3Have a workshop check the connectors on the steering wheel module for contact resistance and oxidation, and repair as needed.
    4. 4Have a workshop measure the sensor's voltage and compare it with the central electronic module (CEM).
    5. 5The steering wheel module and sensor affect steering and stability. Have a workshop carry out diagnosis and repair.

    Symptoms you may notice3

    • The anti-spin warning lamp lights up
    • The general warning lamp lights up
    • The stability function does not work

    What the fault can affect1

    • The stability function is blocked

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.