VOLVO
SAS-U300096 - Control Module. Component Failures. Component internal failure
System
Steering Angle Sensor (SAS)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (8)
- Volvo C30 (2007–2013)2011Engine D4162T, D4164T, D5204T, D5204T5 only
- Volvo C30 (2007–2013)2012–2013Engine D4162T, D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011Engine D4162T, D4164T, D5204T, D5204T5 only
- Volvo S40 (2004–2013)2012Engine D4162T, D5204T, D5204T5 only
- Volvo V50 (2004–2013)2011Engine D4162T, D4164T, D5204T, D5204T5 only
- Volvo V50 (2004–2013)2012Engine D4162T, D5204T, D5204T5 only
What does this fault code mean?
The steering angle sensor checks its own internal components. The code is set when it detects that one of them is not working, which is caused by an internal fault in the sensor.
Possible causes
- Internal malfunction within the steering angle sensor (SAS).
What you can do
- 1Switch off the ignition, wait a while and start the engine. Check whether the code is still stored, clear it and test drive the car.
- 2If the fault is permanent, the steering angle sensor must be replaced. A workshop does this.
- 3The angle sensor is part of the anti-spin and stability system. Have a workshop diagnose and replace it rather than working on the steering wheel yourself.
Symptoms you may notice4
- A yellow warning symbol and text message show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.