VOLVO
SRS-014B - Force limiter/lap tensioner. Invalid combination
System
Supplemental Restraint System (SRS)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C30 Electric (2011–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (4)
What does this fault code mean?
The SRS has found that both an adaptive belt force limiter and a lap belt tensioner are fitted in the car at the same time. Only one of them should be fitted, and which one depends on the car's equipment.
Possible causes
- Both an adaptive belt force limiter and a lap belt tensioner are mounted in the car together
What you can do
- 1Check whether both an adaptive belt force limiter and a lap belt tensioner are fitted on the driver's side
- 2If both are there, have a workshop remove the component that does not belong to the car's equipment
- 3Have a workshop check which component the control module is programmed for and confirm that it matches after the work
- 4After the work, clear the code and see if it comes back
- 5Do not work on the airbag system yourself; have a workshop check it
Symptoms you may notice2
- The SRS warning lamp is on
- An SRS warning message appears
General guidance for car owners. Diagnosis on the car can point to a different cause.