VOLVO
SRS-B00111B - Passenger Frontal Stage 2 Deployment Control. General Electrical Failures. Circuit resistance above threshold
System
Supplemental Restraint System (SRS)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The SRS measures resistance in the stage 2 passenger airbag circuit. If it stays too high for too long, the code is stored. The fault comes from a break in the wire or the airbag, or from high contact resistance at the connections.
Possible causes
- Break in the wire
- Oxidation or contact resistance at the connections
- Open circuit in the stage 2 passenger airbag, where the igniter has too high a resistance
What you can do
- 1Read and clear the code, test drive and see whether it comes back
- 2Have a workshop check the connectors and wire for loose contacts, oxidation and breaks
- 3If the wire is intact, have a workshop replace the stage 2 passenger airbag
- 4Hand the airbag system over to a workshop
Symptoms you may notice4
- SRS warning lamp on
- An SRS warning message is shown
- Warning symbol and text message in the display
- SRS indicator lamp lit or behaving abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.