VOLVO
SRS-B005264 - Passenger Seatbelt Sensor. Algorithm Based Failures. Signal plausibility failure
System
Supplemental Restraint System (SRS)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The code applies to the front passenger seat belt buckle. It is set when the configuration does not match the car's equipment, because the control module software does not suit what is fitted.
Possible causes
- The control module software does not match the vehicle's equipment.
What you can do
- 1Read out the fault code and clear it. If it comes back, the fault is still present.
- 2Have a workshop check whether the front passenger seat belt buckle should be connected to the control module in this particular car.
- 3Have a workshop check that the vehicle's equipment and the control module configuration match.
- 4If the configuration cannot be corrected, the control module may need replacing; have a workshop decide.
- 5Do not work on the airbag system yourself; have a workshop carry out the checks.
Symptoms you may notice4
- SRS warning light on
- SRS warning message shown in the display
- Warning symbol and text message in the display
- Warning lights and chimes for the airbag system come on or behave abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.