VOLVO
SRS-B007064 - Driver Seatbelt Pretensioner "A" Deployment Control (Subfault). Algorithm Based Failures. Signal plausibility failure
System
Supplemental Restraint System (SRS)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The code means that the control module configuration for the driver's seat belt pretensioner (sub-fault A) does not match the equipment fitted in the car.
Possible causes
- The control module software does not match the vehicle's equipment.
What you can do
- 1Read out the fault code and clear it. If it comes back, the fault is still present.
- 2Have a workshop check whether the driver's seat belt pretensioner should be connected to the control module in this particular car.
- 3Have a workshop check that the vehicle's equipment matches the control module configuration and correct any differences.
- 4If the configuration cannot be corrected, the control module may need replacing; a workshop decides this.
- 5Do not work on seat belt pretensioners or the airbag system yourself; have a workshop carry out the checks.
Symptoms you may notice4
- SRS warning light on
- SRS warning message shown in the display
- Warning symbol and text message in the display
- Warning lights and chimes for the airbag system come on or behave abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.