VOLVO
SRS-B102795 - Driver Bobbin Rotation Sensor. Component Failures. Incorrect assembly
System
Supplemental Restraint System (SRS)
Volvo models this fault code applies to
Applies to the following models:
3 modelsV70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (3)
What does this fault code mean?
The airbag control module (SRS) has found that the signal from the driver-side belt reel sensor is short-circuited to an adjacent signal in the connector. The cause is that the sensor's connector has been fitted incorrectly.
Possible causes
- The sensor connector is fitted incorrectly
What you can do
- 1Read and note the code, clear it and see whether it comes back
- 2Have a workshop check that the connector to the driver-side belt reel sensor is seated correctly and that the wiring is not damaged
- 3If no fault is found during the check, have a workshop replace the driver-side belt reel sensor
- 4Do not work on the airbag system yourself; have a workshop carry out the check and, if needed, the replacement
Symptoms you may notice2
- SRS warning lamp lights up or behaves abnormally
- Warning symbol and text message in the display
General guidance for car owners. Diagnosis on the car can point to a different cause.