What does fault code SUM-0192 mean?

Diagnostic fault code details for SUM-0192 (Volvo S60 (2001–2009), Volvo S60 (2001–2009), Volvo S80 (1999–2006)). Repair service at OBD Tuning.

VOLVO

SUM-0192 - Keypad, ADVANCED indication. Signal too high

System

Suspension Module (SUM)

Volvo models this fault code applies to

Applies to the following models:

4 models

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)

Show models by year and engine (6)

What does this fault code mean?

The ADVANCED indication in the keypad gives a signal that is too high. The fault lies in the wire to the indication or in the keypad, and the Four-C function is blocked.

Possible causes

Open circuit in the wire for the indication in the keypad
Open circuit in the ground wire for the indication in the keypad
Short to voltage in the wire for the indication in the keypad
Defective keypad

What you can do

1Check that the connectors at the keypad are secure and not oxidised
2Use a multimeter to check that the wire and ground wire for the ADVANCED indication are not broken
3Use a multimeter to check that the wire for the ADVANCED indication has no contact with positive voltage
4If the wiring is intact, have a workshop replace the keypad

Symptoms you may notice3

The general warning lamp lights
Message in the display
Four-C does not work

What the fault can affect1

The Four-C function is blocked

General guidance for car owners. Diagnosis on the car can point to a different cause.