Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    SUM-C1A0329
    VOLVO

    SUM-C1A0329 - Left Front Height Sensor. General Electrical Failures. Signal plausibility failure

    System

    Suspension Module (SUM)

    Volvo models this fault code applies to

    Applies to the following models:

    7 models

    S60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Show models by year and engine (7)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2007–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2008–2015
    • Volvo XC60 (2009–)2009–2015
    • Volvo XC70 (2008–)2008–2015

    What does this fault code mean?

    The height sensor at the left front wheel gives a signal with a voltage outside the permitted range, which the SUM interprets as a fault. The height sensor tells the SUM the body's position, so when the signal is implausible the Four-C function is switched off.

    Possible causes

    • Contact resistance or oxidation in the connectors
    • A break in the signal wire between the height sensor and the module
    • Damaged height sensor

    What you can do

    1. 1Read and note the code, clear it and road test the car to see whether it returns
    2. 2Check the connector at the height sensor at the left front wheel: it should be secure and free from oxidation
    3. 3Inspect the cable from the height sensor for breaks, chafing and loose clips, especially where it moves with the suspension
    4. 4If you have a multimeter, check that the signal cable is intact from the height sensor all the way to the control module
    5. 5If you have a diagnostic tool: read the height sensor value in live data and see whether it changes smoothly when the front of the car is pressed down and released
    6. 6If the fault returns, have a workshop with diagnostic equipment check the height sensor and the wiring

    Symptoms you may notice2

    • A message appears in the information display
    • The Four-C function does not work

    What the fault can affect1

    • The Four-C function is switched off

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.