VOLVO
SUM-U200A94 - Control Module Internal Power A. Component Failures. Unexpected operation
System
Suspension Module (SUM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The SUM has three internal power supplies that are monitored separately. This code concerns supply A, whose voltage is too high or too low, and it points to an internal fault in the SUM.
Possible causes
- Internal fault in the suspension control module (SUM)
What you can do
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connectors at the SUM are firm and free from corrosion
- 3Check that the suspension system fuses are intact; the owner's manual shows where they are
- 4If the fault returns, have a workshop check whether it is permanent; if so, the control module is replaced, new software is loaded and it is calibrated
Symptoms you may notice2
- A message appears in the information display
- The Four-C function does not work
What the fault can affect1
- The Four-C function is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.