VOLVO
SUM-U201444 - Control Module Hardware. System Internal Failures. Data memory failure
System
Suspension Module (SUM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The SUM stores, among other things, the selected drive program and fault codes in an internal data memory. The fault code is set when the control module cannot communicate with the data memory, the EEPROM.
Possible causes
- Internal fault in the suspension control module (SUM)
What you can do
- 1Clear the fault code and road test the car, then check whether it comes back
- 2Check that the connector at the SUM is firm and free from corrosion
- 3If the fault comes back, have a workshop decide whether the control module should be replaced and, if so, download new software and calibrate it
Symptoms you may notice2
- A message appears in the information display
- The Four-C function does not work
What the fault can affect1
- The Four-C function is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.