VOLVO
SWM-0003 - Headlamp flash. Activated too long
System
Steering Wheel Module (SWM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012All engines except: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Engine B4204S3, B4204S4, B5254T7 only
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
What does this fault code mean?
The steering wheel module (SWM) has registered that the light stalk has been activated for too long. The high beam can then stay on constantly.
Possible causes
- The light stalk has been activated for too long
What you can do
- 1Check that the light stalk is not sticking or stuck in the activated position
- 2If you have a diagnostic tool, read the light stalk status in live data and see that it changes when you use it
- 3If the switch sticks, have a workshop check it and carry out any repair needed
Symptoms you may notice1
- The high beam stays on constantly
General guidance for car owners. Diagnosis on the car can point to a different cause.