VOLVO
SWM-000D - Windshield wiper lever. Invalid combination
System
Steering Wheel Module (SWM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012All engines except: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Engine B4204S3, B4204S4, B5254T7 only
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
What does this fault code mean?
The steering wheel module (SWM) has registered that the single-wipe, high-speed and intermittent-wipe switches on the windscreen wiper stalk were activated at the same time for too long. The wipers then run only at low speed.
Possible causes
- The single-wipe, high-speed and intermittent-wipe switches are activated at the same time
What you can do
- 1Check that the windscreen wiper stalk is not sticking or stuck in an activated position
- 2If you have a diagnostic tool, read the single-wipe, high-speed and intermittent switches in live data and check that only one is active at a time
- 3If the stalk is free but the fault remains, have a workshop check the switch
Symptoms you may notice1
- The wipers run only at low speed
What the fault can affect1
- If the wipers are set to an active position, they run at the lowest speed
General guidance for car owners. Diagnosis on the car can point to a different cause.