VOLVO
SWM-0204 - Steering wheel angle sensor. Current too low
System
Steering Wheel Module (SWM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012All engines except: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Engine B4204S3, B4204S4, B5254T7 only
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
What does this fault code mean?
The steering wheel angle sensor reads two code tracks with light diodes. The module (SWM) has logged that the current through the diode circuit is too low. The fault lies inside the module, and the stability functions are switched off while it is present.
Possible causes
- Malfunction inside the steering wheel module (SWM)
What you can do
- 1Stability control is switched off while the fault is present, so drive carefully until it has been repaired
- 2Read and note the code, clear it and road test to see whether it returns
- 3If you have a diagnostic tool: follow the steering angle value in live data during a short drive and check that it does not freeze or jump
- 4If the fault returns, have a workshop replace the steering wheel module (SWM), since the angle sensor cannot be replaced separately
Symptoms you may notice2
- Traction control warning lamp lit
- The stability control system does not function
What the fault can affect1
- Active yaw control (AYC) is blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.