VOLVO
SWM-0208 - Steering wheel module (SWM). Internal fault
System
Steering Wheel Module (SWM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012All engines except: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Engine B4204S3, B4204S4, B5254T7 only
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
What does this fault code mean?
A fault inside the steering wheel module (SWM) has been logged. While it is present, active yaw control is disconnected and the traction control warning lamp is on.
Possible causes
- Internal electronic fault in the steering wheel module (SWM)
What you can do
- 1Clear the code and road test; if it returns, the fault is not a one-off
- 2Stability control is switched off while the fault is present, so drive carefully
- 3If the fault returns, have a workshop replace the steering wheel module (SWM)
Symptoms you may notice2
- The stability control system does not function
- Traction control warning lamp lit
What the fault can affect1
- Active yaw control (AYC) is disconnected
General guidance for car owners. Diagnosis on the car can point to a different cause.