VOLVO
SWM-0209 - Steering wheel module (SWM). Internal fault
System
Steering Wheel Module (SWM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012All engines except: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Engine B4204S3, B4204S4, B5254T7 only
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
What does this fault code mean?
A fault has been logged inside the steering wheel module (SWM). The stability function does not work while the fault is present, and the traction control warning lamp lights up.
Possible causes
- Fault in the module's own electronics (SWM)
What you can do
- 1Read and note the code, clear it and road test to see whether it returns
- 2Stability control is switched off while the fault is present, so drive carefully until it has been repaired
- 3If the fault returns, a workshop needs to replace the steering wheel module (SWM)
Symptoms you may notice2
- Traction control warning lamp lit
- The stability control system does not function
What the fault can affect1
- Active yaw control (AYC) is blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.