VOLVO
TCM-0032 - Lock-up function. Faulty engage/disengage
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (9)
- Volvo S60 (2001–2009)2006–2007Engine B5254T4, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo S60 (2001–2009)2008–2009Engine D5244T4, D5244T5 only · Transmission TF-80SC only
- Volvo V70 (2000–2008)2006–2007Engine B5254T4, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo V70 (2000–2008)2008Engine D5244T5 only · Transmission TF-80SC only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5 · All transmissions except: AW50/51 AWD
What does this fault code mean?
This is an event-controlled code, meant as information, and it does not indicate a fault in the control module. It is set when the engine has stopped suddenly, for example if lock-up was wrongly engaged when the car stopped, or if the car rolled backwards with the selector in a position.
Possible causes
- The car has rolled backwards while the selector was in a position
- The engine cut out because the fuel ran short
- Mechanical fault in the engine
- Lock-up incorrectly engaged when the vehicle is stopped
What you can do
- 1This is an information code and does not point to a fault in the control module; if it does not return, no action is needed
- 2Clear the fault code and check whether it comes back
- 3If the engine stops without the fuel having run out, have a workshop check the engine for a mechanical fault
Symptoms you may notice5
- The general warning lamp is lit
- The malfunction indicator lamp (MIL) is lit
- Gear shifts are harsh
- No gear shifts
- The gears slip abnormally
What the fault can affect2
- Adaptation is blocked
- Neutral check is blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.