VOLVO
TCM-0048 - Control module. Faulty software
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
10 modelsC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (24)
- Volvo C70 Cabriolet (1998–2005)2000All transmissions except: M56
- Volvo C70 Cabriolet (1998–2005)2001–2005Transmission AW55-50/51SN only
- Volvo C70 Coupé (1998–2002)2000All transmissions except: M56
- Volvo C70 Coupé (1998–2002)2001–2002Transmission AW55-50/51SN only
- Volvo S60 (2001–2009)2001–2002
- Volvo S60 (2001–2009)2003All transmissions except: M58
- Volvo S60 (2001–2009)2004–2009Transmission AW50/51 AWD, AW55-50/51SN only
- Volvo S70 (1997–2000)2000All transmissions except: M56, M58
- Volvo S80 (1999–2006)1999Transmission 4T65EV, 4T65EV-GT only
- Volvo S80 (1999–2006)2000–2004
- Volvo S80 (1999–2006)2005–2006All transmissions except: M56
- Volvo V70 (1997–2000)2000All transmissions except: M56, M58
- Volvo V70 (2000–2008)2000–2002
- Volvo V70 (2000–2008)2003All transmissions except: M58
- Volvo V70 (2000–2008)2004–2007Transmission AW50/51 AWD, AW55-50/51SN only
- Volvo V70 (2000–2008)2008Transmission AW55-50/51SN only
- Volvo V70 XC (1998–2000)2000Transmission AW42 AWD only
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2007Transmission AW50/51 AWD only
- Volvo XC90 (2003–)2003, 2015
- Volvo XC90 (2003–)2004All transmissions except: M66 AWD
- Volvo XC90 (2003–)2005–2006All transmissions except: M66 AWD, TF-80SC AWD
- Volvo XC90 (2003–)2007Transmission AW50/51 AWD, AW55-50/51SN only
- Volvo XC90 (2003–)2008–2014Transmission AW50/51 AWD only
What does this fault code mean?
The transmission control module has found that its software is not adapted to the engine and transmission fitted to the car. The software must be the correct version for that combination for the transmission to work properly. When the engine, transmission and software do not match, the code is set.
Possible causes
- Wrong software loaded in the transmission control unit (TCM)
- Wrong transmission fitted, for example after a transmission was replaced
What you can do
- 1Read off and clear the fault code, then road test the car to see whether it comes back
- 2Think about whether the transmission has been replaced, as the engine, transmission and software must then match each other
- 3Have a workshop order and load the software that belongs to the car's engine and transmission; this is a workshop task
Symptoms you may notice2
- General orange warning lamp on
- Malfunction indicator lamp (MIL) flashing
What the fault can affect1
- The control module's Limp Home program has been activated
General guidance for car owners. Diagnosis on the car can point to a different cause.