VOLVO
TCM-0071 - Function, immobilizer. Faulty signal
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (15)
- Volvo C30 (2007–2013)2007–2013Transmission AW55-50/51SN only
- Volvo C70 (2006–2013)2006–2013Transmission AW55-50/51SN only
- Volvo S40 (2004–2013)2004, 2011–2012Transmission AW55-50/51SN only
- Volvo S40 (2004–2013)2005–2010Transmission AW50/51 AWD, AW55-50/51SN only
- Volvo S60 (2001–2009)2006–2007Engine B5254T4, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo S60 (2001–2009)2008–2009Engine D5244T4, D5244T5 only · Transmission TF-80SC only
- Volvo V50 (2004–2013)2004, 2011–2012Transmission AW55-50/51SN only
- Volvo V50 (2004–2013)2005–2010Transmission AW50/51 AWD, AW55-50/51SN only
- Volvo V70 (2000–2008)2006–2007Engine B5254T4, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo V70 (2000–2008)2008Engine D5244T5 only · Transmission TF-80SC only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5 · All transmissions except: AW50/51 AWD
What does this fault code mean?
The start inhibitor makes sure the engine can only be started with the gear selector in position P or N, so the car does not move off when it is started. The transmission control module sends a signal to the engine control module, which should be grounded when starting is allowed. The fault means the signal is grounded all the time, including in gear positions where starting should not be allowed.
Possible causes
- Contact resistance in the connections
- The signal cable is short-circuited to ground
- Internal fault inside the transmission control unit (TCM)
What you can do
- 1Clear the fault code, start the engine again and see whether the code returns
- 2With diagnostic equipment, check the start inhibitor status in each gear position with the brake pressed; start should be allowed only in P and N
- 3Use a multimeter to check that the cable between the transmission control module and the engine control module has no short circuit to ground
- 4Have a workshop check the connectors and wiring and fix the fault
Symptoms you may notice2
- The engine does not start
- The engine can start with the selector in R or D
General guidance for car owners. Diagnosis on the car can point to a different cause.