Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    TCM-0095
    VOLVO

    TCM-0095 - Gear selector lever control module communication. Signal too low

    System

    Transmission Control Module (TCM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    4 models

    S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Show models by year and engine (13)
    • Volvo S80 (1999–2006)1999–2004
    • Volvo S80 (1999–2006)2005–2006All transmissions except: M56
    • Volvo V70 (2000–2008)2000–2002
    • Volvo V70 (2000–2008)2003All transmissions except: M58
    • Volvo V70 (2000–2008)2004–2007Transmission AW50/51 AWD, AW55-50/51SN only
    • Volvo V70 (2000–2008)2008Transmission AW55-50/51SN only
    • Volvo V70 XC / XC70 (2001–2007)2001–2002
    • Volvo V70 XC / XC70 (2001–2007)2003–2007Transmission AW50/51 AWD only
    • Volvo XC90 (2003–)2003, 2015
    • Volvo XC90 (2003–)2004All transmissions except: M66 AWD
    • Volvo XC90 (2003–)2005–2006All transmissions except: M66 AWD, TF-80SC AWD
    • Volvo XC90 (2003–)2007Transmission AW50/51 AWD, AW55-50/51SN only
    • Volvo XC90 (2003–)2008–2014Transmission AW50/51 AWD only

    What does this fault code mean?

    The transmission control module receives a signal from the gear selector module (GSM) that is too low. The fault means the signal from the gear selector module is too low, so the gear position may be shown incorrectly or not at all on the panel.

    Possible causes

    • Contact resistance in the connections
    • The communication line is shorted to ground

    What you can do

    1. 1Read off the fault code, clear it and check whether it comes back
    2. 2Check the connectors at both ends of the communication line for contact resistance and oxidation
    3. 3Press the brake, move the selector through the positions and compare the gear in the instrument panel with the display on the selector panel
    4. 4If only the instrument panel shows the gear, the circuit board in the top panel may need replacing; a workshop should decide whether the fault lies in other systems

    Symptoms you may notice4

    • Malfunction indicator lamp (MIL) on
    • General orange warning lamp on
    • No gear position shown on the gear selector panel
    • General warning lamp on

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.