VOLVO
TCM-013B - Linear pressure solenoid SLC2. Signal too high
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (9)
- Volvo S60 (2001–2009)2006–2007Engine B5254T4, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo S60 (2001–2009)2008–2009Engine D5244T4, D5244T5 only · Transmission TF-80SC only
- Volvo V70 (2000–2008)2006–2007Engine B5254T4, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo V70 (2000–2008)2008Engine D5244T5 only · Transmission TF-80SC only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5 · All transmissions except: AW50/51 AWD
What does this fault code mean?
Linear pressure solenoid SLC2 gives too high a signal: the control module has measured a current in the circuit that is higher than allowed. The solenoid cannot then be controlled properly, which affects the system pressure and gear changes.
Possible causes
- Signal wire short-circuited to supply voltage
- The linear pressure solenoid does not function
- Internal fault inside the TCM
What you can do
- 1Read and clear the fault code, road test, then note whether it returns
- 2Use a multimeter to check that the signal wire to the solenoid has no contact with the battery positive
- 3If you have a diagnostic tool: read the SLC2 solenoid value in live data during a road test
- 4Check the wiring from the gearbox for chafing and loose connectors
- 5If the fault returns, have a workshop check the solenoid and the control module
Symptoms you may notice5
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Gears slip abnormally
- Harsh gear changes
- Gear changes do not occur
What the fault can affect1
- An auxiliary program in the control module is activated
General guidance for car owners. Diagnosis on the car can point to a different cause.