VOLVO
TCM-0287 - Hall sensor in the gear selector. Internal fault
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (6)
- Volvo C30 (2007–2013)2007–2013Transmission AW55-50/51SN only
- Volvo C70 (2006–2013)2006–2013Transmission AW55-50/51SN only
- Volvo S40 (2004–2013)2004, 2011–2012Transmission AW55-50/51SN only
- Volvo S40 (2004–2013)2005–2010Transmission AW50/51 AWD, AW55-50/51SN only
- Volvo V50 (2004–2013)2004, 2011–2012Transmission AW55-50/51SN only
- Volvo V50 (2004–2013)2005–2010Transmission AW50/51 AWD, AW55-50/51SN only
What does this fault code mean?
The main sensor in the gear position sensor has registered a value that is too low. The sensor in the transmission control module receives the selector position through a cable, and the fault is due either to the position needing adjustment or an internal fault in the control module. The car may then enter an emergency program with harsher gear changes.
Possible causes
- The gear position sensor position (offset) needs adjusting
- Internal fault inside the TCM
What you can do
- 1Read the fault code and then clear it
- 2If you have a diagnostic tool: show the selector position in live data and compare it with the display as the lever is moved
- 3Have a workshop check the selector cable adjustment and calibrate the gear position sensor using the correct procedure
- 4If the code remains after calibration, have a workshop replace the transmission control module
Symptoms you may notice3
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
What the fault can affect1
- The control module emergency program Emergency mode 4 is activated
General guidance for car owners. Diagnosis on the car can point to a different cause.