VOLVO
TCM-05B4 - Hydraulic pressure solenoid, clutch even gears. Hydraulic pressure to high
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (10)
- Volvo C30 (2007–2013)2008Engine D4204T only · Transmission MPS6 only
- Volvo C30 (2007–2013)2009–2010Engine B4204S3, D4204T only · Transmission MPS6 only
- Volvo C30 (2007–2013)2011–2013Engine B4204S3 only · Transmission MPS6 only
- Volvo C70 (2006–2013)2009–2010Engine D4204T only · Transmission MPS6 only
- Volvo S40 (2004–2013)2008Engine D4204T only · Transmission MPS6 only
- Volvo S40 (2004–2013)2009–2010Engine B4204S3, D4204T only · Transmission MPS6 only
- Volvo S40 (2004–2013)2011–2012Engine B4204S3 only · Transmission MPS6 only
- Volvo V50 (2004–2013)2008Engine D4204T only · Transmission MPS6 only
- Volvo V50 (2004–2013)2009–2010Engine B4204S3, D4204T only · Transmission MPS6 only
- Volvo V50 (2004–2013)2011–2012Engine B4204S3 only · Transmission MPS6 only
What does this fault code mean?
Hydraulic pressure on clutch 2 (even gears) reads higher than requested. The cause is either a damaged output stage for solenoid CSPS1 or a damaged pressure sensor.
Possible causes
- Damaged output stage, solenoid CSPS1
- Damaged pressure sensor
What you can do
- 1Read the fault codes, clear TCM-05B4 and drive the car to see whether it comes back
- 2Have a workshop read the pressure sensor and output stage with diagnostic equipment
- 3Have a workshop open the transmission control system and check the solenoids and oil level. Replace the mechatronic unit if the fault cannot be fixed
Symptoms you may notice5
- Yellow warning symbol and text message in the display
- Shifts hard or jerky
- Gear changes take too long to complete
- Shifts too early, too late or too often
- No automatic gear changes
General guidance for car owners. Diagnosis on the car can point to a different cause.