VOLVO
TCM-DD02 - Control module communication. Communication fault
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (15)
- Volvo C30 (2007–2013)2007–2013Transmission AW55-50/51SN only
- Volvo C70 (2006–2013)2006–2013Transmission AW55-50/51SN only
- Volvo S40 (2004–2013)2004, 2011–2012Transmission AW55-50/51SN only
- Volvo S40 (2004–2013)2005–2010Transmission AW50/51 AWD, AW55-50/51SN only
- Volvo S60 (2001–2009)2006–2007Engine B5254T4, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo S60 (2001–2009)2008–2009Engine D5244T4, D5244T5 only · Transmission TF-80SC only
- Volvo V50 (2004–2013)2004, 2011–2012Transmission AW55-50/51SN only
- Volvo V50 (2004–2013)2005–2010Transmission AW50/51 AWD, AW55-50/51SN only
- Volvo V70 (2000–2008)2006–2007Engine B5254T4, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo V70 (2000–2008)2008Engine D5244T5 only · Transmission TF-80SC only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only · Transmission TF-80SC, TF-80SC AWD only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5 · All transmissions except: AW50/51 AWD
What does this fault code mean?
The data exchanged over the LIN wire with the gear selector module (GSM) contains errors, and the signal from the gear selector is too high or too low. The cause may be interference on the wire, fast intermittent short circuits or breaks, or a short to supply voltage or ground.
Possible causes
- Electrical noise on the LIN wire running between the gear selector and the transmission control module
- Very fast intermittent shorts or breaks on the LIN wire to the gear selector
- The LIN wire shorted to supply voltage or ground
What you can do
- 1If you have a diagnostic tool, read the status of the winter program selector (W) and press the switch in and out. The status should change
- 2Have a workshop check the LIN wire for intermittent short circuits and breaks
- 3If the fault remains and the wire shows nothing, the gear selector circuit board may be faulty. Have a workshop try a new one
Symptoms you may notice2
- General warning lamp lit
- Gear selector indicator does not function
What the fault can affect2
- Manual mode (MAN) is disabled
- Winter mode (W) is disabled
General guidance for car owners. Diagnosis on the car can point to a different cause.