VOLVO
TCM-P060741 - Control Module Performance. System Internal Failures. General checksum failure
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (9)
- Volvo S60 (2011–)2014–2015Transmission TG-81SC only
- Volvo S80 (2007–)2014–2015Transmission TG-81SC only
- Volvo V40 (2013–)2015Transmission TG-81SC only
- Volvo V40 Cross Country (2013–)2015Transmission TG-81SC, TG-81SC AWD only
- Volvo V60 (2011–)2014–2015Transmission TG-81SC only
- Volvo V60 Cross Country (2015–)2015Transmission TG-81SC only
- Volvo V70 (2008–)2014–2015Transmission TG-81SC only
- Volvo XC60 (2009–)2014–2015Transmission TG-81SC only
- Volvo XC70 (2008–)2014–2015Transmission TG-81SC only
What does this fault code mean?
The transmission control module has registered that communication between its processor and its memory is disturbed or missing. This may be a software fault or an internal fault in the module, and the shifts can then go wrong or stop.
Possible causes
- Software fault in the transmission control module
- Internal fault in the transmission control module
What you can do
- 1Read the fault code and clear it; road test the car to see whether it comes back
- 2Have a workshop reload the transmission software and check that the correct version is installed
- 3Have a workshop replace the transmission control module if the fault remains after the reload; a new module must be programmed
Symptoms you may notice5
- Shifting takes too long
- The automatic gearbox shifts harshly or jerkily
- No manual shifting
- Kickdown does not work
- Engine braking does not work as it should
What the fault can affect1
- The transmission control module restarts itself
General guidance for car owners. Diagnosis on the car can point to a different cause.