VOLVO
TCM-P060C68 - Internal Control Module Main Processor Performance. Algorithm Based Failures. Event information
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (9)
- Volvo S60 (2011–)2014–2015Transmission TG-81SC only
- Volvo S80 (2007–)2014–2015Transmission TG-81SC only
- Volvo V40 (2013–)2015Transmission TG-81SC only
- Volvo V40 Cross Country (2013–)2015Transmission TG-81SC, TG-81SC AWD only
- Volvo V60 (2011–)2014–2015Transmission TG-81SC only
- Volvo V60 Cross Country (2015–)2015Transmission TG-81SC only
- Volvo V70 (2008–)2014–2015Transmission TG-81SC only
- Volvo XC60 (2009–)2014–2015Transmission TG-81SC only
- Volvo XC70 (2008–)2014–2015Transmission TG-81SC only
What does this fault code mean?
This is an event-driven information code, and it does not point to a fault in the transmission control module where it is active. It shows that the module has been reset involuntarily, and a checksum is used to make sure the information in the module is sound.
Possible causes
- Faulty software in the transmission control module
- Internal fault in the transmission control module
What you can do
- 1This is an information code; if it does not come back, no action is needed
- 2If it comes back, have a workshop reload the transmission software from the software manager, since faulty software may be the cause
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.