VOLVO
TCM-P074E00 - Unable to Engage Gear 6. General Failure Information. No sub type information
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (37)
- Volvo S60 (2011–)2011Engine B4164T, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7, D4162T only · Transmission MPS6 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3, D4162T only · Transmission MPS6 only
- Volvo S80 (2007–)2007All transmissions except: M66
- Volvo S80 (2007–)2008All engines except: B4204S3, B4204S4, D4204T · Transmission TF-80SC, TF-80SC AWD only
- Volvo S80 (2007–)2009All engines except: B4204S3, D4204T · Transmission MPS6, TF-80SC, TF-80SC AWD only
- Volvo S80 (2007–)2010All engines except: B4204S3, D4164T, D4204T · Transmission MPS6, TF-80SC, TF-80SC AWD only
- Volvo S80 (2007–)2011All engines except: B4204S3, B6304T4, B6324S4, B6324S5, D4164T, D5204T2, D5244T10 · Transmission MPS6, TF-80SC, TF-80SC AWD only
- Volvo S80 (2007–)2012Engine B4164T, B4164T2, B4204T6, B4204T7, B5254T10, D4162T only · Transmission MPS6, TF-80SC only
- Volvo S80 (2007–)2013–2014Engine B4164T, B4164T2, B4204T6, B4204T7, D4162T only · Transmission MPS6 only
- Volvo S80 (2007–)2015Engine B4164T, D4162T only · Transmission MPS6 only
- Volvo V40 (2013–)2013Engine B4164T only · Transmission MPS6 only
- Volvo V40 (2013–)2014–2015Engine B4164T, D4162T only · Transmission MPS6 only
- Volvo V40 Cross Country (2013–)2013Engine B4164T only · Transmission MPS6 only
- Volvo V40 Cross Country (2013–)2014–2015Engine B4164T, D4162T only · Transmission MPS6 only
- Volvo V60 (2011–)2011Engine B4164T, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo V60 (2011–)2012All engines except: B6304T4, D5204T3, D5244T11, D5244T15 · Transmission MPS6 only
- Volvo V60 (2011–)2013–2014Engine B4164T, B4164T2, B4164T3, B4204T7, D4162T only · Transmission MPS6 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3, D4162T only · Transmission MPS6 only
- Volvo V70 (2008–)2008All engines except: B4204S3, B4204S4, D4204T · Transmission TF-80SC, TF-80SC AWD only
- Volvo V70 (2008–)2009All engines except: B4204S3, D4204T · Transmission MPS6, TF-80SC, TF-80SC AWD only
- Volvo V70 (2008–)2010All engines except: B4204S3, D4164T, D4204T · Transmission MPS6, TF-80SC, TF-80SC AWD only
- Volvo V70 (2008–)2011Engine B4164T, B4204S4, B4204T6, B4204T7, B5254T10, B5254T11 only · Transmission MPS6, TF-80SC only
- Volvo V70 (2008–)2012Engine B4164T, B4164T2, B4204T7, B5254T10, D4162T only · Transmission MPS6, TF-80SC only
- Volvo V70 (2008–)2013–2014Engine B4164T, B4164T2, B4204T7, D4162T only · Transmission MPS6 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2, D4162T only · Transmission MPS6 only
- Volvo XC60 (2009–)2009Transmission TF-80SC AWD only
- Volvo XC60 (2009–)2010All transmissions except: M66 AWD
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only · Transmission MPS6 only
- Volvo XC70 (2008–)2008–2009Transmission TF-80SC AWD only
- Volvo XC70 (2008–)2010All transmissions except: M66 AWD
- Volvo XC90 (2003–)2005Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2006Engine B8444S only · Transmission TF-80SC AWD only
- Volvo XC90 (2003–)2007–2010Engine B6324S, B8444S only · Transmission TF-80SC, TF-80SC AWD only
- Volvo XC90 (2003–)2011Engine B6324S5, B8444S only · Transmission TF-80SC, TF-80SC AWD only
- Volvo XC90 (2003–)2012–2013Engine B6324S5 only · All transmissions except: AW50/51 AWD
What does this fault code mean?
6th gear cannot be engaged properly, because its ratio is close to that of another gear even though the control module has selected 6th. The cause may be a solenoid stuck in the off or on position, a damaged valve or shift mechanism, or a fault that has not yet been detected.
Possible causes
- Contact resistance, or a solenoid stuck in the off or on position
- Mechanical faults in the transmission
- Damaged valve
- Damaged shift mechanism
- An electrical fault not yet detected
- A hydraulic fault not yet detected
What you can do
- 1Read and clear the code, then road test in sixth gear to see whether it returns
- 2If you have a diagnostic tool: activate the solenoids that belong to 6th gear in the tool's test and listen for clicks
- 3Have a workshop check the connectors and wiring to the 6th gear solenoids, and the oil quality and level
- 4If no fault is found there, have a workshop look at the valve and the transmission's mechanics
Symptoms you may notice4
- The emissions warning lamp (MIL) and the general warning lamp come on
- Abnormal slipping gear changes
- Gear changes do not happen
- Red text message and warning symbol in the display
What the fault can affect1
- The control module controls the transmission with an auxiliary program
General guidance for car owners. Diagnosis on the car can point to a different cause.